Stereolithography (SLA) 3D printing

Usage arrangement

TRAINED
MEMBERS

Access
permission

BOOKING
REQUIRED

Requirement
before usage

WITH
TUTORS

Buddy system
requirement
  1. [For trained members] Only members who go through the training tutorial on this page can use the SLA 3D Printer
  2. [Booking required] Before using our SLA 3D printer, please fill in the registration form. The technical team will receive your reservation and contact you through email with an allocated timeslot for your SLA printing job. Please come to meet our technical expert in the timeslot assigned. 
    If you do not have a project supervisor, please contact our staff (Director of Innovation Wing/ technical staff/ tutor staff), we are very happy to help you.
  3. [Operate the machine with tutors] Please operate the SLA 3D printer with the presence of our tutors, they are experienced operators and are very happy to help.
Usage procedure for trained members
User manual of Phrozen SLA Printer

Please click on the following button to access the official user manual and download the Phrozen Sonic mini 8K manual

User manual of the phrozen sonic mini 8k sla 3d printer
Safety rules

General safety recap from the official user manual

Safety instructions must be followed when operating or maintaining the equipment. If ignored, a physical injury may result, or damage may occur to the equipment. Always observe applicable safety precautions when working with this equipment.

Please refer to the complete safety guide in the manual of Phrozen SLA printer. Below shows some important recap of the safety rules of the machine:

Do Not Operate With Case Removed
Do not operate machine with the case removed.

 

Wear Gloves
Resin is a chemical irritant which may make damage to your skill. Always wear protective gloves if you have to open the case. When setting up material for printing, wear gloves that provide protection against resin’s irritation.

 

Do Not Adjust
Never make adjustments to equipment prior to reading the manual. Special instructions may be required.

 
 
 
 

Wear Eye Protection
Always wear approved safety glasses whenever printing. Regular glasses do not provide sufficient eye protection! The resin is a chemical irritant, if not quickly washed out, it can injure your eyes. 

 
 

Read Manual
Read the equipment operator’s guide for specific operator instructions and additional safety requirements. Do not attempt to operate this machine until you have read and understood all safety precautions and operating instructions.

 
 
Operational guideline (under construction)
(to be completed by tutor/technician/training member)

BOOKING REQUIRED

3D printer Phrozen Sonic Mini 8k

Booking (SLA 3D printing machine)

  • Each booking slot spans 4 hours.
  • Please make the booking at least 1 hour in advance (available timeslots in the upcoming 2 weeks are listed).
  • Note: Innovation Wing is closed on University / public holidays. Please double-check and do not make bookings on those dates.  
SLA Printing registration form

Before using our SLA printer, please fill the SLA Printing registration form. 

The technical team will receive your reservation and contact you through email with an allocated timeslot for your SLA printing job.

Please confirm the booking and meet our technical expert in the timeslot assigned. 

Registration of use of equipment in Innovation Wing
  • After confirming the drawing file, please fill in the registration form.
  • Note: Members, tutors, and technicians who go through this tutorial, please also fill in the form once and fill the following info:
    • Please use your name and student/staff ID
    • Project supervisor as “Innovation Wing”
    • Supervisor email as “innowing@hku.hk”
    • Project type please select “Training – Work on the training material”.
    • Equipment please select “Reservation – SLA 3D printer (To make a reservation)”
Operational guideline (under construction)
(to be completed by tutor/technician/training member)
For Inquiries, Please Contact

Please contact

    • Natalie Chan (natcychan[at]hku.hk), the teaching assistant of the Tam Wing Fan Innovation Wing, or
    • Ryan chan (ryancck[at]hku.hk), the senior technical assistant of the Tam Wing Fan Innovation Wing